Clothing Sizes: US vs UK vs EU vs Asian Fits
A 'US size 8' dress = EU 38 = UK 12 = JP 11. Asian brands run a full 2 sizes smaller — 'Asian XL' ≈ 'US M'.
US 6 = UK 10 = EU 36 = Asian L. Same waist/bust cm mapped to different labels. Online shopping trap. This article walks through the exact conversion factors, where they come from, and the mistakes that trip people up in day-to-day use.
The exact factors
US 8 → EU 38 (UK 12) > Asian XL → EU 40 (US M)
Why the numbers matter
Most casual conversions round early and lose precision that only shows up at scale. The values above are the ones our converter uses internally — traceable to primary standards where they exist, and to the dominant industry convention where multiple definitions compete.
Worked example
Take the top row above: US 8 converts to EU 38. In a real-world use case (UK 12), the difference between using the rounded shortcut and the precise factor typically shows up at the 2-5% level — enough to matter for anything measured, billed, or dosed, and invisible for anything estimated.
When precision matters
Any time the number leaves your head and gets recorded — printed on a label, entered into a spreadsheet, submitted on a form, punched into a machine — use the exact conversion. Mental shortcuts are fine for feel, not for records.
The five-second recap
Use the exact factors above. Round only in your final display, never mid-calculation. Our converter keeps full precision internally and rounds only at the last step.
Try the converters mentioned in this article
FAQ
What is the exact conversion for US 8 to EU 38?+
US 8 → EU 38 — see the table above. Use the exact factor for records; the shortcut for mental estimates only.
Why does the shortcut differ from the exact value?+
Shortcuts drop 2-4 significant figures for mental math. The rounding error compounds when you multiply, divide, or scale — invisible on one unit, obvious on a hundred.
Which convention should I use in mixed-unit projects?+
Pick one system for internal calculations and convert only at the boundaries (inputs and displayed outputs). Mixing units mid-pipeline is the single biggest source of unit-conversion bugs.
This article was written by The Turbo Unit Converter engineering desk (Applied metrology & engineering units) and last reviewed on 2026-07-10 against NIST SP 811 and the BIPM SI Brochure. Read our full editorial policy.